|Read this whole guide offline with no ads, for a very low price!|
Use coupon code "certiguide" to save 20%!
|NEW! Network+ N11-003 2005 Beta Exam Study Guide - Just $9!|
|Get It Here!|
XI TCP/IP Network Diagnostic Utilities
While the TCP/IP suite
has a wide variety of programs available for troubleshooting,
or obtaining performance data. The following utility programs
are valid test questions for the NETWORK+
Most of these utilities
are command-line programs. To run them, first run cmd.exe
(if on NT or Windows 2000) or command.com (if on Windows
9x), and when the Command Prompt box opens, type the desired utility
COMMAND.COM vs. CMD.EXE
NT has 2 command shells. The 16-bit shell is command.com. The 32-bit shell is cmd.exe. It is preferable to use the 32-bit shell, cmd.exe by navigating to Start -> Run then typing cmd.exe of the switches on the NBTstat command is expected for the Network+ exam.
|If you find CertiGuide.com useful, please consider making a small Paypal donation to help the site, using one of the buttons below. You can also donate a custom amount using the far right button (not less than $1 please, or PayPal gets most/all of your money!) In lieu of a larger donation, you may wish to consider buying an inexpensive PDF equivalent of the CertiGuide to Network+ from StudyExam4Less.com. (Use coupon code "certiguide" by December 31, 2004 to save 20%!) Thanks for your support!|
Table Of Contents - Contact Us
CertiGuide for Network+ (http://www.CertiGuide.com/netplus/) on CertiGuide.com
Version 1.0 - Version Date: November 7, 2004
Adapted with permission from a work created by Tcat Houser and Helen O’Boyle.
CertiGuide.com Version © Copyright 2004 Charles M. Kozierok. All Rights Reserved.
Not responsible for any loss resulting from the use of this site.