Read this whole guide offline with no ads, for a very low price!
Click Here!
Use coupon code "SAVE50" to get it half price!

Custom Search







Table Of Contents  CertiGuide to A+ (Core Hardware)
 9  Chapter 0111:  Peripheral Devices
      9  VIII  Printers
           9  Laser Printers

Previous Topic/Section
Developing
Previous Page
Pages in Current Topic/Section
1
Next Page
 Fusing
Next Topic/Section

Transferring

The transferring phase is where the paper finally shows up. The paper passes over a Transfer Corona Wire that applies a uniform positive charge to the paper.

The toner that is stuck to the photosensitive drum is pulled onto the paper by its opposite electro-magnetic charge.

The paper is then discharged buy a static eliminator strip to prevent it from becoming hung up in any of the other assemblies.


Previous Topic/Section
Developing
Previous Page
Pages in Current Topic/Section
1
Next Page
 Fusing
Next Topic/Section

If you find CertiGuide.com useful, please consider making a small Paypal donation to help the site, using one of the buttons below. You can also donate a custom amount using the far right button (not less than $1 please, or PayPal gets most/all of your money!) In lieu of a larger donation, you may wish to consider buying an inexpensive PDF equivalent of the CertiGuide to A+ (Core Hardware) from StudyExam4Less.com. (Use coupon code "SAVE50" to save a full 50% off the already low price!) Thanks for your support!
Donate $2
Donate $5
Donate $10
Donate $20
Donate $30
Donate: $


Home - Table Of Contents - Contact Us

CertiGuide to A+ (Core Hardware) (http://www.CertiGuide.com/aplush/) on CertiGuide.com
Version 1.0 - Version Date: December 6, 2004

Adapted with permission from a work created by Tcat Houser.
CertiGuide.com Version © Copyright 2004 Charles M. Kozierok. All Rights Reserved.
Not responsible for any loss resulting from the use of this site.