Laser Troubleshooting Tips
Damp paper, improper media or a worn separation pad could cause a Laser print to feed more than one sheet at a time
A contaminated fuser roller could make the backside of the copy dirty.
The printer cable for ECP use is parallel cable IEEE 1284
After installing a printer always print a test page. Initiate a test page using the operator panel on the printer or through the properties page in the printer settings. See Figure 87, Figure 88 and Figure 89.
Home - Table Of Contents - Contact Us
CertiGuide to A+ (Core Hardware) (http://www.CertiGuide.com/aplush/) on CertiGuide.com
Version 1.0 - Version Date: December 6, 2004
Adapted with permission from a work created by Tcat Houser.
CertiGuide.com Version © Copyright 2004 Charles M. Kozierok. All Rights Reserved.
Not responsible for any loss resulting from the use of this site.