The Network Interface Configuration Tool can be seen in Figure 359. This tool is developed by Red Hat and is included in many distributions. Figure 360 shows the window used to modify or add an interface. Merely enter the appropriate network information (Static IP number, Net Mask, etc.) if it is a static interface or select Automatically Obtain IP Address Settings if it is a dynamically configured interface. Click OK to return to the previous window and deactivate then activate the interface, which will cause the changes to take effect.
Home - Table Of Contents - Contact Us
CertiGuide to A+ (A+ 4 Real) (http://www.CertiGuide.com/apfr/) on CertiGuide.com
Version 1.0 - Version Date: March 29, 2005
Adapted with permission from a work created by Tcat Houser et al.
CertiGuide.com Version © Copyright 2005 Charles M. Kozierok. All Rights Reserved.
Not responsible for any loss resulting from the use of this site.