Example of Configuration
(Page 7 of 8)
Resolution Mode and Color Depth Settings
The correct listings for the resolution modes come next, as shown below. If correct, enter 4, otherwise they can be adjusted by entering the number associated the resolution needing to be changed.
For each depth, a list of modes (resolutions) is defined. The default
resolution that the server will start-up with will be the first listed
mode that can be supported by the monitor and card.
Currently it is set to:
"640x480" "800x600" "1024x768" "1280x1024" for 8-bit
"640x480" "800x600" "1024x768" "1280x1024" for 16-bit
"640x480" "800x600" "1024x768" "1280x1024" for 24-bit
Modes that cannot be supported due to monitor or clock constraints will
be automatically skipped by the server.
1 Change the modes for 8-bit (256 colors)
2 Change the modes for 16-bit (32K/64K colors)
3 Change the modes for 24-bit (24-bit color)
4 The modes are OK, continue.
Enter your choice: 4
Finally select the color depth desired.
Please specify which color depth you want to use by default:
1 1 bit (monochrome)
2 4 bits (16 colors)
3 8 bits (256 colors)
4 16 bits (65536 colors)
5 24 bits (16 million colors)
Enter a number to choose the default depth.
Home - Table Of Contents - Contact Us
CertiGuide to A+ (A+ 4 Real) (http://www.CertiGuide.com/apfr/) on CertiGuide.com
Version 1.0 - Version Date: March 29, 2005
Adapted with permission from a work created by Tcat Houser et al.
CertiGuide.com Version © Copyright 2005 Charles M. Kozierok. All Rights Reserved.
Not responsible for any loss resulting from the use of this site.